After owning a Sea-Doo Spark since they first came out I have gathered a nice list of the must-have Spark accessories. Some of this stuff is a no-brainer but the others will make you want it!
If you want a general jet ski accessories guide then go here.
1. Sea-Doo Spark Registration Numbers
Registration numbers sound simple, just buy some mailbox numbers and throw them on the side of the Spark. You can’t do that. The body of the Spark won’t let regular stickers stay on.
If you don’t clean the top surface area with rubbing alcohol the numbers will not stick. This is because the Spark body has a protective layer on it from the factory.
Even if you buy the Sea-Doo Number Kit here (Amazon Link Ad), you’ll still want to clean the surface where you place the numbers. When I say clean I mean place some rubbing alcohol on a clean rag and scrub – stop if you see any color transfer on the rag.
Once you have the numbers on you’ll need to let them sit in the sun all day long if you want them to stay. Don’t jump in the water right away or they will fall off!
2. Sea-Doo Spark Cover
The next Sea-Doo Spark Accessory is a cover. I personally did not get the cover that Sea-Doo sells as I think it’s too much. The cover I use is this one here (Amazon Link Ad) and I’m happy with it. I don’t tow with the cover on, if you do that then consider the Sea-Doo Spark Cover here (Amazon Link Ad). (Make sure to get the correct size if you have a 2up or 3up)
The whole body of the Spark is Ploy-Tec which is a type of plastic. Unlike fiberglass, plastic is not porous, so it does not dry out the same way that fiberglass does. That is why you see old jet ski’s looking chalky.
This does not mean your Spark won’t fade; nothing is safe from the Sun. What a cover will do is keep excess rainwater, dust, and bird poop away from your machine. Rainwater and bird poop are very acidic and combined with Sunlight it’s a recipe for a mess.
Tip: Wipe the seat down before you put a cover on it or remove the seat and store it somewhere dry. This will keep mold from growing on the seat.
3. Shock Tube
A shock tube or also called an impeller protector (Amazon Link Ad) helps keep your tow rope away from the intake of the Spark. Out of all the Sea-Doo Spark Accessories, this one is a must-have for sure.
Think of it like this, you’re riding a 90HP vacuum and whatever is in the way of the intake will get sucked up. Something like rope doesn’t do well in a jet pump as it gets wrapped around the driveshaft.
You have the full force of the engine wrapping up this rope around the driveshaft and it eventually runs out of rope and stops the engine. The engine won’t start unless you get that rope freed so now you got to figure out how to get back to land. Even worse is that most often you’ll have to cut the tow rope free and thus destroying the rope.
Getting that impeller protector almost becomes a no-brainer when you see it this way.
4. Sea-Doo Spark Battery Charger
Not only did I sell Sparks, but I also put them together out of the box. I’ve come to learn that it’s painfully hard to replace the battery in one – the access panel is small and puts up a fight.
The good news is that the battery Sea-Doo gives you is decent – like way better than you might think. To keep the batter good for years the trick is to keep it on a battery charger or maintainer. I talk about this in great detail on why keeping your battery on a charger is great here.
Not just any battery charger will do. The best option is to use a Solar Panel Charger like this one here (Amazon Link Ad) to help keep your battery maintained. When you’re not using a jet ski for weeks the battery starts to drain; it’s the nature of the lead-acid batteries. Even your car would do the same if you did not drive it for months.
Trust me; you want the solar charger as it’s not fun to replace those batteries. One tip is to remove the whole top deck which can take like 10 minutes to do and then the battery is super simple to change out. Or take it to the local dealer, the shop guys can probably do it blindfolded.
5. Sea-Doo Spark Life Jackets
It’s pretty obvious you’ll need a life jacket on any jet ski; you would be a fool not to wear one. You need to buy the correct life jacket that is approved for jet skis.
One option is the O’Neill Wetsuits Wake Waterski Men’s Superlite USCG Nylon Life Vest (Amazon Link Ad) which will be fine to use.
I talk more about the different types of life jackets here if you want to see what works better for you. There is a video showing you how to properly fit one on your body in that post.
6. Spark Snap-In Fenders
The Snap-In Fenders (Amazon Link Ad) fall in the category of the coolest-but-simplest idea ever. They pop in the hole that is already on the Spark and they keep you from rubbing against the dock. You must remove them when you go for a ride as they will not stay on with all the waves.
You only need 2 per Spark – as you only dock on one side. The Spark will have the holes on each side, one in front the other in the rear.
7. Sea-Doo Spark Safety Kit
I love the Sea-Doo Safety Kit. I would recommend getting the Sea-Doo Safety Kit Here (Amazon Link Ad) because it has a special shape that fits under the glove box of the Spark. I use the kit as a dry box to keep my keys, phone, and wallet dry. Plus, it’s bright so you can see it if you drop it in the water.
8. Sea-Doo Spark Front Storage
I didn’t put this option that high up, don’t get me wrong having storage is important. But if you get a Spark with iBR then more than likely you already have this option along with the step in the rear.
If you got a base model, then you can get the front storage here (Amazon Link Ad).
Is it hard to install? No. Just make sure to use the correct size drill bit. It’s about 6 holes you’ll have to drill, and the Spark already has the indentions for where they go.
I never got the front storage option and instead went with a dry bag like (Amazon Link Ad) this one here. I clip it on the front side or off the rear tow hook. I like this better because it’s cheaper and I can take it with me. I would still buy the dry bag even if you have the front storage because the front storage is not dry, unlike a dry bag.
9. Sea-Doo Spark Reboarding Step
Just like the front storage above you might already have this accessory if you got the Spark with iBR.
If you have a base model Spark, then the Spark Reboarding Step (Amazon Link Ad) is one of the must-have Sea-Doo Spark accessories. I would get this step before I ever got the front storage because the step makes your life easier.
If you buy the step and install it yourself, there is some stuff you need to know. First, you need some Clear Silicone Waterproof Sealant like this here (Amazon Link Ad) because you’re drilling into the hull of the craft. I know it sounds scary, but if done right it’s no big deal. The next thing you need to know is once you read the directions and put the sealant in the holes and screwed the step on is that you need to let the sealant dry for 24 hours. Don’t fudge the numbers, make sure to give it a full 24 hours.
10. Sea-Doo Spark Safety Lanyard & Locks
One interesting thing about the Sea-Doo Spark is the key, also known as a safety lanyard. This thing clips onto your life jacket and the other end goes on a ball on the Spark.
What is interesting is that some Sparks will have the DESS key which is an encrypted key and will only start your Spark. Then you have other Sparks that don’t have a DESS key but use a standard magnetic key. The magnetic key can start any Spark without DESS which is just about every Spark without iBR.
Which sparks have the DESS key? All the 2016 and up models with iBR. The base model and previous Sparks just have a standard magnetic key.
You can get the Sea-Doo Spark key here (Amazon Link Ad), but if you have the DESS model, you need to have a dealer program a DESS key for you (no way around this). I go into great detail about what to do if you lose your key here if you want to learn more.
No matter what key you have I still recommend a cable lock like this one here (Amazon Link Ad) to keep your Spark secured. It doesn’t matter if your Spark is on a trailer or a dock, having a lock that loops around the front hook will make it harder for people to steal it.
11. Oil Change Kits For Sea-Doo Spark
Every year you should change the oil in your Spark or every 50 hours, whichever comes first. You can take it to the dealer and let them do it, or you can do it yourself.
It’s not difficult but if you never changed the oil on something before, then you might have a hard time.
The good news is that you can get oil change kits like this one here (Amazon Link Ad), but you’ll need an Oil Extractor like this one (Amazon Link Ad) to get the oil out. Some other good news is that there is a video on how to do it here…
Some people say you can change the spark plugs every other year, but I recommend changing them every year. Spark plugs going bad is what makes a jet ski not run well, and it’s simple to install them so why not do them?
12. Speed Ties For Sparks
Speed ties (Amazon Link Ad) are not really a must-have, but they can make life easier for you. Speed ties are retractable dock lines that you pull out at the dock and retract when you’re done.
The Spark even has places for you to install them so they look like it was made for it.
Speed ties are a super convenient way to pull up to a dock a tie-up quickly. When you’re done they retract back in and you head off. No need to mess with storing lines and them getting dirty or tangled.
The downside is that you don’t want to use them for overnight or long-term docking. I would use a regular dock line for that. Speed ties are for the times you go to the gas docks or stop to eat at that restaurant on the water.
Overall, the speed ties are the most convenient of the Sea-Doo Spark Accessories.