Let’s talk about covers. Let’s also answer some of the common questions people have about them and some helpful tips that can make your life a little easier.
Do You Need A Cover?
What is the Best Jet Ski Cover? – The best jet ski cover is going to be ones made for your exact model jet ski. You can find covers often sold at your local dealer but you can also find them online by searching for your model.
A cover is probably the best thing you can get for your watercraft (besides insurance). A cover will help protect your jet ski from the Sun and other things like birds.
It doesn’t matter what a salesman or your buddy says; you need to get a cover. Above all else, you need to have that cover on the watercraft when you’re not riding it for optimal protection.
Why Don’t Covers Last Anymore?
The thing about covers is that they will last anywhere from 3 to 5 years if you’re lucky.
But this is a good thing.
When you think about it, you’ll want the thing that protects your expensive watercraft to get damaged and not the watercraft itself.
It may seem confusing that covers wear out so quickly. The reason is that they’re under a lot of abuse even if you’re gentle with them. What the cover does is protect your watercraft from the elements. The biggest things it protects your machine from is the Sun and water which do the most damage to the cover.
There’s an old saying: “The worst thing for your boat is Sun and Water“.
If your cover looks bad then imagine how your watercraft would have looked if you didn’t use a cover?
One reason I think people think their covers doesn’t last that long is that the Jet Ski is usually the furthest thing from people’s minds until they want to use it. You may use the machine a couple of times a year, and after 3 years it may feel like you just bought a cover not too long ago.
Why Are Covers So Expensive?
It’s a fact that covers do go up in price every year just like most things.
Since you’ll need to get a cover every 3 to 5 years, it might be worth it to look at affordable covers. You can get some affordable covers online which is great news! But these covers are not the same thing you would get at most dealerships.
Here is a Cover I’ve used on My Jet Ski before and works well. (Amazon Link Ad)
The covers made by the manufacturer are really good covers. Most of these covers will have a thicker material that holds up better, and some even go as far as having cotton padding to protect the hoods and such.
Probably the biggest perk of getting a cover that is made for your watercraft is that it’s usually easier to put on. Most Sea-Doo covers will have cotton padding; this tells you that this is the front of the cover. You drape the cover over and align up the handlebars. Put the nose on next and come around the rear for complete coverage. The manufacture’s cover will fit like a glove and don’t require any complicated ratcheting. Another big perk is that most of these covers are well thought out that they have zippers that allow you to get to the gas fill and many other compartments of the watercraft. I’ve even seen some covers come with a carrying bag that is a part of it.
The cheaper covers or the “universal fit” covers are like baggy jeans, sure you have pants on, but you need a belt to make it work. These covers are usually made of thinner materials and don’t last as long, well some of the modern ones are lasting a long time nowadays. I use a universal cover for my Sea-Doo Spark, and it works fine. These covers tend to have a ratchet or clips that you have to use to tighten down to the watercraft. Also, these covers work really well for trailers as some have the underside clips that keep the cover on when you tow it.
Can I Tow With My Jet Ski Cover On?
This is more of a personal taste, but I recommend not towing your jet ski with the cover on especially on short trips.
No matter how good the cover fits and snugs up to the jet ski I’ve seen them fly off. And when they do fly off its when you’re going down the interstate, and it always flies to the other side of the road and lands in a mud puddle (from my own personal experiences)
For long rides, I find the cover rubs the plastic and other parts of the jet ski raw. The constant wind pressure also stretches and wears the covers out quicker too.
The counter-argument is that people leave the covers on to keep the watercraft from getting dirty or rocks hitting them. This is a very valid argument.
I have found a middle ground when it comes to this problem.
To get the best of both worlds I wrap certain friction points under the cover with a microfiber rag and throw a ratchet strap across the middle of the jet ski to keep it from completely flying off.
Before you even consider washing your cover, you need to be honest with yourself. If the cover feels brittle, has holes, or super moldy, then it is time for a new cover. If you try to wash a cover that is falling apart, you’re only going to be doing more damage to it.
If you need to get mold off of your jet ski cover, then the best thing to use is a mildew spray like this one here (Amazon Link Ad).
To keep the mold from coming back is almost impossible. The Jet Ski is exposed to moisture all the time – that is just the nature of the beast. But you can slow down the growth of mold by spraying mold spray often on the inside of the cover. Also, allowing the watercraft to dry out before you put the cover on is the biggest thing you can do. Use a Shammy or Towel to dry off the seats and the watercraft before you put the cover on and the mold problem won’t be much of a problem anymore.
Another option is to use Simple Green and a scrub brush to clean the covers really well.
I have heard of some people putting covers in a front-loading washing machine and putting it on the gentle cycle with a light detergent. I’m not a fan of this as this could do more damage than good if you’re not careful.
Why Do We Even Need Covers?
Why can’t they just make the watercraft hold up better to the sun? My car does just fine, and I don’t have to cover it!
Your watercraft is made of Fiberglass (unless it’s a Spark). Fiberglass is very different than the painted metal that your car has. The reason why watercraft are made of fiberglass is that its light but also strong and most importantly the more affordable option compared to similar materials. If it were affordable, they would make watercraft out of carbon fiber, but it’s too expensive to do so.
Just like your skin fiberglass is porous, and also like your skin, it dries out quickly too. You put lotion on, and a jet ski needs wax also to protect it from the Sun. Waxing a jet ski is not fun and can be time-consuming, so we instead put covers on them. The cover also keeps rainwater and bird poop off of it which can be damaging as they could contain acids in them.
Cover Too Tight!
When you get a Jet Ski cover especially one from the manufacturer, it can be hard to put on. This is very common. You want a tight cover if you plan on towing it behind your car, but just like shoes, the cover needs to be broken in.
Make sure to put the handlebars on first, then the nose, and lastly the rear.
If you try to put the cover on the rear first, then it’s going to feel impossible. It’s always handlebars, then the nose, and the rear. Any other way and you’ll be yelling and cussing the cover.
If it’s a brand new cover I like to lay it out in the Sun for a couple of hours before I put it on so that it stretches out a bit. This can make putting the cover on soo much easier.
Plus, the cover will get easier to put on overtime just like how shoes get easier to put on overtime.
Where Can You Get Covers?
You can get jet ski covers from your local dealer or online.
We have created a guide to help you find the best cover that fits your jet ski here.